Product Overview
Dia-Compe's 11 speed Bar-End shifter! Is this the UNO shifter in ENE form? Yet to hear back from DC.....
The micro ratchet design makes the upshift and downshift effort feel almost the same, lovely clean, crisp shifting awaits.......
They work with 8-speed to 11-speed drive systems and most common derailleurs.
Right Side Only.
Metal cable ferrules and gear outer is best and a light oil should be applied to the inner cable when installing - This promotes life and helps keep the moisture out.
Top Tip - Pop a little Loc-Tite on the D-ring bolt threads, this will unsure the bolt does not rock loose when riding the rough stuff.
Please Note - We have tried this in the workshop with a few different mechs, and found that it shifts with no problems - However you should match the speed of the cassette to the speed of your mech - EG - 11 speed cassette matched an with 11 speed mech.
The reason for this, is that some 10 speed mechs are built in such a way that no matter how much the limit screw is out, it cannot stretch to 11.
And this can be true for others, like a 9 speed mech shifting with a 11 speed cassette - The mech just cant manage.
But then using a 9 speed mech with a 10 speed cassette could be fine. It very much depends on mech spec and cassette ratio.
Unfortunately we have not been able to try them all, yet......
