Product Overview
The NITTO x Rivendell Campee 32F Front Bicycle Rack is a small front rack that mounts by a single bolt through the fork crown and two bolts into fork blade braze-ons or with the supplied clamps to go around your forks blades.
The Campee 32F makes an ideal bag support, or something to throw a lighter load on.
Its strength lies in its simplicity - No movable parts. No aluminium struts. Just tubular chromoly, fillet brazed by a skilled hand.
The finish is typical Nitto perfection: Impeccable brazing, followed by tough nickel plating and hand burnished to a lovely dull lustre redolent of an early 70’s Pioneer receiver.
Measure from the centre of the hole in your fork crown, down to your mid-blade mounts. If it's 144-145mm-ish? You should be able to get it on there - If not the supplied P-clips will do it - Providing your fork is suitable for the P-clips.
Will not work with V-Brakes.
Max Payload Is 2KG
For loads greater than 2KG, pop a voile strap around the tombstone of the rack and loop it up to your bars as an extra support.
Length 190cm Width 110cm Height 290cm.
Tombstone - Width 50mm Height 125mm.
Lower Braze Mount - Centre 2 Centre - 100mm.
More Pics Coming Soon....
Made In Japan.
